Centrifugal fidget spinner (608 bearing)

Centrifugal fidget spinner

designed for 608 standard ball-bearing and 9mm ball-bearing-balls.

9mm balls are free to move in the arms of the spinner;
when rotating, they are pressed outside. Once it slows down, when spinning vertically, they drop down again and make nice, clickery sounds.
Spinning horizontally is silent - depending only on the bearing you use in the middle.

Assembly: fill one to three balls in each arm and push bearing in the middle. It's an easy fit, due to the open arms. Once I had my bearing fine, I secured it with a drop of super glue.

Original CAD data can be found and reused in Onshape:

Tap for 608 - bearing "608 tap":
https://cad.onshape.com/document-redirect.html?d=/documents/e26c115415e3a61a40bfa7b1/w/01e075720ce131a2232920a2

Fidget Spinner itself "centrifugal spinner":
https://cad.onshape.com/document-redirect.html?d=/documents/cd5d6b5ee77e86217893983a/w/087f49fa1bbc9eb1fda428d9