Captured Penny Fidget Spinner

Someone asked if I could make a Captured PENNY Fidget Spinner to go along withmy Captured Nickle and Captured Quarter spinners. So, here it is. There is a file for ABS or PLA.

Use your favorite button or one of mine, either ABS or PLA.

I used Fusion 360 for this design.

Designed for 2 pennies in each hole making my cost $0.79 ( 6 pennies, 1 bearing, plastic)

THIS REQUIRES THAT YOU PAUSE THE PRINTER AT ABOUT 60% TO DROP THE PENNIES IN.

Link to bearings that I used https://www.amazon.com/gp/product/B01C9XDPVQ/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

Link to Pennies that I used
https://www.usmint.gov/

Print Settings

Printer:
Monoprice Maker Select v2

Rafts:
No

Supports:
No

Resolution:
0.2

Infill:
20 - 100

Notes:
at about 60% complete you need to pause the printing and drop the pennies in
use 2 pennies per coin hole
make sure you have the sides of the coins showing that you want
CAUTION - the pennies hold the heat from the bed alot longer than the plastic