Captured DIME Fidget Spinner

Here is the Captured DIME Fidget Spinner to go along with my Captured Penny, Captured Nickle and Captured Quarter spinners. There is a file for ABS or PLA.

Use your favorite button or one of mine, either ABS or PLA.

I used Fusion 360 for this design.

Designed for 3 dimes in each hole making my cost $1.32 ( 9dimes, 1 bearing, plastic)

THIS REQUIRES THAT YOU PAUSE THE PRINTER AT ABOUT 65% TO DROP THE DIMES IN.

Link to bearings that I used https://www.amazon.com/gp/product/B01C9XDPVQ/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

Link to Dimes that I used
https://www.usmint.gov/

Print Settings

Printer:
Monoprice Maker Select v2

Rafts:
No

Supports:
No

Resolution:
0.2

Infill:
20 - 100

Notes:
at about 65% complete you need to pause the printing and drop the dimes in
use 22-3 dimes per coin hole
make sure you have the sides of the coins showing that you want
CAUTION - the dimes hold the heat from the bed alot longer than the plastic