Summary

This was a quick throw together for a friend's costume. If I had silver filament, I would have done a color change for the top half (I recommend that.) Instead, it will be painted. I used a brand new roll of ABS that I hadn't quite dialed in, so pardon the imperfect print.

I simply printed it at .2mm with 20% infill. Nothing fancy. It'll likely be hot glued to the belt material. There are no actual provisions for anchoring material to the piece. Get creative ;)

Print Settings

Printer:

Tevo Tarantula

                                            <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>.2mm Layer Height</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>20%</p></div></p>                                                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>If you want to make a "real" buckle out of it, you can remix it.  Or print a part and glue it on.  If I thought there were real interest, I would make those improvements.  But I'm guessing that you are one of 3 people reading this :)</p></div>

Greatest American Hero Belt Buckle