QU-BD OneUp/TwoUp - Extruder and X-Axis Redesign

This replaces the X-Axis Belt driven system with a Lead Screw Driven System. All the parts are untested as of this moment.

Note that a Hole for the M4x20mm screw will need to be drilled in the Gantry. I will make some detailed instructions when I'm satisfied that this design works.

Extra parts to purchase:
(4) M3 x 8mm screws
(2) M3 x 12mm Screws
(2) M3 x 35mm Socket Head Screws (required only for Single Body Extruder)
(8) M3 Hex Nuts
(1) M4 x 20mm Screw
(1) M4 Hex Nut
(1) 5/16-18 x 1" Button Head Screw
(1) 5/16-18 Lock Nut
(1) 7/8" Internal Retaining Clip (OD .943, THK 0.046)
(1) 3/8-12 ACME Lead Screw Nut (from QU-BD Store)
(1) 3/8-12 ACME Lead Screw:
OneUp = Order a Second ACME Lead Screw from the QU-BD Store
TwoUp = will need to order and Cut an ACME Lead Screw to 10 1/2" Long
(1) 3/8-16 Hex Jam Nut (McMaster P/N: 96557A114) for Tensioner

Note: Be sure your X-Axis Stepper Motor shaft has not been bent. If it is swap the X-Axis Motor with the Y Axis motor (do not replace it with the Z or the bend will affect your prints). The parts should be updated and work properly.

Please let me know of any issues you find in the files.