Quadcopter 1 SQ Protective Frame

Protect your quadcopter from inevitable damage during indoor flight with this simple, sleek, and very light protective frame. Before printing, be sure the X-Dimensions are around 185 mm (with uniform scaling, this should make the Y-Dim. about 95 mm) should it not download with the correct scale. Once both halves are printed, glue the halves together as seen in the photo (I used CA glue which has worked well). To mount to the quadcopter, unscrew the circuitry plate and the frame should slide between the small red spacers with slight clearance. Finally, put everything back together exactly as it was before. If for some reason this does not work, please let me know so I can correct it.