Summary

This a phone case that I designed for my BQ Aquaris E4.5 Ubuntu Edition.

Print Settings

Printer:

TEVO Tarantula

                                            <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.2mm</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>20% Honeycomb</p></div></p>                                                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>Material: Das Filament Orange PETG<br>Nozzle Temperature: 235°C<br>Bed Temperature: 70°C</p><p>I printed the case twice, first at 102% scale and once more at 103%. The first time it ended up being slightly smaller than it should, and fitting the phone inside was a bit hard. The second time it was a slightly larger, but the fit was pretty good.</p><p>So, I ended up using the second case at 103% scale but I think 102.5% scale should be the sweet spot, of course that will also depend on the tolerances of your printer.</p></div>

How I Designed This

The case was designed on FreeCAD, using measurements that I took from my phone and its old broken case. The fcstd file is available for download, if you want to make your own modifications on my design.

I used the original logo of Ubuntu which can be found here, together with its license. The Ubuntu logo is a registered trademark by Canonical Ltd.

BQ Aquaris E4.5 Ubuntu Phone Case