Customizable Minnowboard Max Turbot Case

UPDATED 15/2/1019 - now includes a side hole for side reset switch found on newer minnowboards

This is a case for the MinnowBoard Max Turbot computer board.
The case was designed using OpenScad.

Four M3 x 30 mm bolts need to joint base to the lid
Four short PC screws are needed to hold board in to the bottom tray.
Set variables to true / false within the SCAD script to remove / add case holes as needed.
Change the screw hole sizes to use different screws.
Increase tray depth to accomadate different lures.