Summary

A flat model of the CityEL, an one-person electric three-wheeler designed and launched in Denmark in 1987 and later produced in Germany until 2013.

This model features the redesigned front rib from 1989.

Includes a keyfob version and a standing one.

Instructions

Three surface layers and 30% infill works here, but you can probably use lower settings with similar success. I find that honeycomb infill looks better if you use semi-transparent PLA and low infill.

The cityel, small and wide are early versions - cityel.stl is not pretty, but has a vague contour that you can trace with a pen to get more of a drawing effect.

The thin and thick versions (Props to Michael Mueller for the vector model) now has the back wheel attached, and are extruded in different widths to be used as a flat model and as a standing one, respectively. Scaled to 5-6cm it is pretty solid, but at 9-10cm the front window line might be a bit bendy.

The keyring6 and standing7 are relatively cleaned up and improved versions. The keyring version is flat on the under side for better finish and has a better contour on the top. The standing version has a thicker top and driver head so it doesn't break so easily. I suggest you use these for best results.