Repkord 1/2 lb Spool Container Tool Caddy

Repkord 1/2 lb spool caddy. I've made a few for tools and for painting.

After printing the drawer insert it into the repkord spool and mark where the top hinge will align. (pretty close to the edge) Then remove it and drill the hole through the top and bottom. Included is a drawer hinge to fit into the bottom of the drawer. Clean out the bottom hold and insert the hinge. (glue if you like, or drop and lose it 2 times like I did... ) Then spread the spool slightly and insert the drawer, repeat for each drawer. You can use the drawer slots as spacers if you want.