Summary

printed with no supports and 0.2 mm layers with a 0.3 nozzle, probably could do 0.28+ if you've got a 0.4 mm nozzle.

Print Settings

Printer:

Anet A8(custom)

                                            <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.2mm</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>10%</p></div></p>                                                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>Printed at 95mm/s print it in the orientation that it comes in, not sure if this is the case but it seems like in simplify3d it saves on about 2 grams of material, no idea why but it prints just fine in that oreintation. </p></div>

How I Designed This

Using Blender I edited the files

            <div><p>I took the larger faces of the holder and did two subdivides and then took the verts from the two holes that I made and made an edge, from there I made a few faces. I also removed the backside of the hook as I'm super gluing it to my own hook design so it's a flat, I did this with a circles selection and removed the necessary faces and then refaced it. </p></div>

lighter version Of xbox one controller holder