Ultimaker Alu bed with 3-point bed leveling (package)

As I got a nice alu sheet I decided to build a new print bed out of it, incorporating a nice, nearly plug-in 3-point bed leveling.
Here I gathered all needed informtion/parts as a package:

• Alu bed: dimensions and positions for M3 threads can be found in the pdf
• Replacement parts for front bed mount as direct plug-in replacement
• Rear bed mount parts (need to drill 3 holes in the plywood)
• Bed washers from http://www.thingiverse.com/thing:22448
• M3 screw knob from http://www.thingiverse.com/thing:225286
  Further you need:
• 3 pc. Original bed springs
• 3 pc. M3x40 mm screws or threaded rods
• 6 pc. M3x10mm screws
• 9 pc. M3 nuts
• glass plate 242x242, thickness as you like, 2mm recommended
• 2pc. bulldog clamp
• 3mm drill for cleaning the guiding holes
  As I finished replacing my acrylic bed, I'm absolutely glad with this setup as it needs not too much space, less modification on the original parts and gives a very smooth and easy leveling.
  Next will be to add a silicon heater pad to get a heated bed