Summary

This parametric paint bottle holder is highly configurable. You can select the number of rows, columns, sizing, spacing, and angle. The STL uploaded has a 15 degree top and is sized to fit either small model paints, or the common 2 fl. oz. acrylic paints found in many craft stores.

Print Settings

Printer Brand:

SeeMeCNC

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>Rostock MAX v2</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.3</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>10%</p></div></p>                                                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>This should print fairly easily on most printers.  Use the tallest layer height you can successfully print to minimize the print time, and use the lowest infill that will successfully support the bottoms of the bottle holes.  I use KISSlicer, and with the octagonal infill, 10% works well for me.  The model shown has a 2 mm space around each bottle with a -1 mm gap between each hole resulting in the holes blending together with the bottles fitting nicely.  If you want distinct holes, give the spacing a positive value (I recommend a multiple of your extrusion width for a cleaner print).</p></div>

Parametric Paint Bottle Holder