Captured Dollar Fidget Spinner

Someone asked if I could make a Captured Sackagawea Fidget Spinner to go along with my other Captured Coin fidget spinners. So, here it is.

I used Fusion 360 for this design. Still learning it, so this design could probably be improved.

Designed for 1 dollar in each hole making my cost $3.73 ( 3 dollars, 1 bearing, plastic)

THIS REQUIRES THAT YOU PAUSE THE PRINTER AT ABOUT 55% TO DROP THE DOLLARS IN.

Link to bearings that I used https://www.amazon.com/gp/product/B01C9XDPVQ/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

Link to Dollars that I used
https://www.usmint.gov/

Notes:
at about 55% complete you need to pause the printing and drop the dollars in
use 1 dollar per coin hole
make sure you have the sides of the coins showing that you want
CAUTION - the dollars hold the heat from the bed alot longer than the plastic