Summary

This is a small flashlight that i designed to print with the Ultimaker.
All you need is two AG12 button cells and a 5mm Led. Version 2 has an improved push switch.

Have fun printing it!

Instructions

-Calibrate your printer that the widht of the housing is 35mm(see picture)
-Put the negative led wire through the small hole down the bottom compartment.
-Be sure this wire lays flat to the bottom!!!
-Cut off the excessive wire
-Push the actual led in the hole
-Drop in two AG12 button cells negative polarity down
-Put the potitive wire in place
-Cut off the excessive wire
-Put the swith button in place
-Close the litte box by pushing it together.

Mini flashlight V2