Summary

This is just a basic mount for any webcam. I'm using a Logitech C920, but any camera with a standard 1/4" tripod mount screw should work.

Instructions

Just print and attached to the side rail with M5-10 screws and T nuts. Use Post Install T nuts so you don't need to disassemble. http://store.makerstoolworks.com/hardware/t-slot-nuts-post-install/

For the camera, a standard 1/4-20 screw or bolt should be all you need. I used a slightly longer screw with a nut on it so it is easier to hand tighten.

MendelMax 2 Generic Webcam Mount