Summary

This is my first upload to Thingiverse. It was an experiment to see if the design would work for storing the cards and was made on Tinkercad.

This was created as a test for the storage of the standard set of Sushi Go! cards. Had a few issues with the printer but I will put that down to user error.

Print Settings

Printer:

Da Vinci 1.0 AiO

                                            <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>Yes</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.3</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>10%</p></div></p>                                                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>Best to print the face part with the face on the bed to save on filament for support material. Tested with an older model and the face insert is fairly loose. Have increased the sides without testing so it may need to be modified slightly after print.</p><p>The same is required with the body, this can be printed rounded side down. Supports will be printed to the central band.</p><p>Happy to take any criticism as this is my first attempt at a self designed project.</p></div>

Post-Printing

For afterwards...

            <div><p>I have had to post process quite a bit, this was due to my own personal issues with the printer and support material was being really stubborn. My original print was slightly too small for the insert so I have modified the STL files to hopefully rectify this. There is no locking mechanism for the face to the body so this may cause issues with the box opening whenever it feels like it.</p></div>

How I Designed This

Just starting out.

            <div><p>I have used Tinkercad, a very good online resource to get started with. I have designed a few basic items on there for personal use but this is my first upload.</p></div>

Sushi Go! Card Storage