Summary

I use the Tilescape dungeon tiles and wanted to be able to connect them directly to my OpenLock tiles, so I made this hybrid connector. Put it in one way up and the bottoms of the tiles will line up, flip it over and the tops of the tiles will line up.

Many thanks to the Rocket Pig Games for making the Tilescape set.
Kudos to Printablescenery for creating and sharing the OpenLock standard.

Print Settings

Printer Brand:

Wanhao

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>Wanhao Duplicator i3 V2</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.2</p></div></p>                                                                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>Doesn't require infill due to the size, took about 12 minutes to print a single one.  May fit tight on the Tilescape side depending on your extrusion, just rub it a little with an emery board and you'll be good to go.</p><p>If you're using a slicer with ironing, make sure to turn it off, on mine it causes slight overhangs on the edges, which makes the whole thing not fit properly on either side.</p></div>

Tilescape - OpenLock Hybrid Connector