Summary

This is a screw for Workbench3D's clamp :)
To make it easier to print, I've separated the model. (and also the thread has been rounded)
Glue them together and replace with broken one :3

I've also added STEP file!
You can modify this and make your own designed grip for it :)
If you do so, please let me know xD

Note:
Unfortunately, this thing will NOT fits to the original clamp at this time.

Print Settings

Printer:

Geeetech MeCreator 2

                                            <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.05mm</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>30-100%</p></div></p>                                                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>with PLA, 0.2mm layer height.<br>The grip doesn't need so much high infill percentage, but you definitely print the connector and thread with 100% infill. (otherwise, you will broke it pretty easily)<br>To get better layer adhesion, increase your extruder temperature just a little bit (approximately 5-10 degrees).</p><p><strong>DO NOT ROTATE THE CONNECTOR!!!</strong><br>The original direction is the proper way to get better result.</p></div>

G27 Clamp screw