Double slit pattern
Taz5 with moarstruder. no raft or support. 20% infill. extruder 235C. Plate 85C. 2.85 PETG (gluestick) from makergeeks. It is roughly 20cm long, using moarstruder it took 7 minutes to print (resolution 0.8mm)
Taz5 with moarstruder. no raft or support. 20% infill. extruder 235C. Plate 85C. 2.85 PETG (gluestick) from makergeeks. It is roughly 20cm long, using moarstruder it took 7 minutes to print (resolution 0.8mm)