Mavic Controller Mount

When out flying my Opale Paramodels, I wanted to get some arial fottage of the wings in flight, Having had one go where placed the mavic in hover behind me I placed the controller down as needed to launch and fly the paraglider.

I set about making a mount that can be used on and Controller putter... AS in the images shows or any other mounting you might have

The Mount is held in place by double side tape and 2 tie wraps.. as shown in one of the images

Velcro straps are then fed through the holes in the mount and around the Mav Mount I use, (Can be used with Phoenes also for less weight (I tried the Galexy 8+ and worked well)

Gap in bottom area allows for the lead to be plugged into the bottom of controller

When not in use simply secure or remove the straps.