acastro VEX Robotics Match Controller Remix - benglerts

Thanks for the case design acastro. My daughter's team is excited about using the Raspberry's and reducing the clutter at the next tournament. I made one using your files and let the team make requests. The attached STL files contain the changes, but no RAM.
I redrew it using your design as a base. Changes include:

1. Smaller vents to fit the Ram (cosmetic).
2. A taller case to completely house the vex controller and add some plastic above the vex controller usb port. That stiffened it some.
3. Reduced USB holes to give slightly thicker posts. (Help some, but they still break easy).
4. New back plate to accommodate the extra deep case and align the lid and box.
5. Larger cutout to access the micro SD card.
6. Removed the four mounting tabs. (The teacher requested this because they are using Velcro to secure them).
7. Adjusted Raspberry standoffs and cutouts to give slightly more clearance beneath the PI and added side walls and tabs to locate and secure the pi. Center marks for the screw holes are there, but don't seem to be needed. If the PI is removed and installed a bunch, screws could be added.