Summary

This is a tool/jig to set the correct distance between stone and toolholder/bar on a number of popular wetgrinders like tormek, sheppach and others.

I chose to print this in the elaborate and somewhat flamboyant "Copper Rust" pla. You can choose any other inferior colour you might like. ;)

UPDATE 19/01/2018: Edited the model to make sure the holes slip onto the guide rod better.
Update 13/1/19: Changed it to be further from infringing some copyright.

Print Settings

Printer:

Anet A8

                                            <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.2</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>15%</p></div></p>                                                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>Infill is entirely up to you. This thing does not really have to support anything, so I'm sure 10% would be ok.<br>The resolution will matter if you want to use this interchangeably with another similar tool. In this case, it must be accurate in order for you to produce a consistent grind on your tools. If you only use this one, it makes no real difference if it's ever so slightly inaccurate - the point is consistency.</p></div>

Wetgrinder Tool Setter