Summary

··=[ SDX's CR-10S Y-Tension-Tool ]=··
SDX's little helper ;-P

Post-Printing

How-To

            <div><p></p><h5>What parts do I need?</h5><ul><li>1x Y-Tension-Tool_01</li><li>1x Y-Tension-Tool_02</li><li>1x Y-Tension-Tool_03</li><li>Maybe anyone for fixing the screws... but works alone, too!</li></ul><p><br></p><p></p><h5>And how does it work? ...</h5><ol><li>Print the Parts. 0,2mm draft quality is enough. Maybe a little more infill (30%). Align them on the bed like shown on the picture.</li><li>Insert Part 1-3 into the Y-thingy like shown on the photos.</li><li>Loosen all 4 screws.</li><li>Press Part 2 between 1 and 3 soothes will tension the Y-axis.</li><li>Fix the 4 screws.</li><li>Remove the 3 Tool parts.</li><li><b>Done!</b></li></ol><p><br><br></p></div>

SDX's CR-10S Y-Tension-Tool

··=[ SDX's CR-10S Y-Tension-Tool ]=··SDX's little helper ;-P

··=[ SDX's CR-10S Y-Tension-Tool ]=··
SDX's little helper ;-P