Samsung remote holder w/o screws version 3

I created this version 3 of the remote control holder without screws for more surface area for the double sided sticky tape and a hole where you can slide your finger along to "eject" the remote control right into your hand.
This thing is more easily to mount flush under the edge of a table.
I changed the design a bit to print it on the back without the need of supports.

Print Settings

Infill: 20%

Raft: no

Support: no

Layer: 0,2mm

Nozzle: 200°

Bed: 60°

Used Filament:
https://www.amazon.de/gp/product/B01CD7ODZU/ref=as_li_ss_tl?ie=UTF8&psc=1&linkCode=sl1&tag=derfanblogde-21&linkId=0b0c66826fafb0a32bb26f6e9e908139

Super sticky tape (fully removable and really strong):
https://www.amazon.de/gp/product/B01CD7ODZU/ref=as_li_ss_tl?ie=UTF8&psc=1&linkCode=sl1&tag=derfanblogde-21&linkId=0b0c66826fafb0a32bb26f6e9e908139

I always use the following tape on my CR-10:
https://www.amazon.de/gp/product/B01CD7ODZU/ref=as_li_ss_tl?ie=UTF8&psc=1&linkCode=sl1&tag=derfanblogde-21&linkId=0b0c66826fafb0a32bb26f6e9e908139
This stuff is really great, no extra glue needed, 100% sticky to the printed parts, which come off really easily, even without destroying the tape.

Have fun!

(Amazon Affiliate Links & Tip enabled)