Micro Brushed FPV Quadcopter 115mm

The source file is included. Open with freeCAD.
This is a micro quadcopter frame I designed for FPV. It is 115mm diagonal and is made for 8.5mm brushed motors. Use tape and/or rubberbands to hold your FC and other items. This is a pretty generic frame and is made for 65mm props. The front motors have enough gap to allow for a standard camera+transmitter module with mushroom antenna.

I am using an 800mAh 25c battery w/ 5-10 minute flight time. It is a bit on the overweight side at 74g w/ battery. Max thrust should be around 100-115g I believe according to a youtube prop test. I would recommend 400-600mAh batteries.

The body is designed to hold a standard 30x30 brushless FC and converted to brushed using these items from banggood:

Brushed Motor Controller
https://www.banggood.com/Micro-Brushless-Motor-Driver-for-Naze32-Spracing-F3-Flight-Controller-p-1079832.html?rmmds=myorder&cur_warehouse=CN

3.7v -> 5v Voltage Regulator
https://www.banggood.com/DC-DC-3_7V-to-5V-Step-Up-Voltage-Booster-Regulator-Micro-Power-Module-For-Brushed-Racing-Quadcopter-p-1092602.html?rmmds=myorder&cur_warehouse=CN

FlySky Micro PPM Receiver 6CH (Compatible with Turnigy 9x v2)
https://www.banggood.com/Compatible-FLYSKY-Pro-Micro-2_4G-6CH-PPM-Receiver-for-AFHDS-Transmitter-p-1151475.html?rmmds=myorder&cur_warehouse=CN