Summary

This is just freewilly's plain Oneplus One case with a small hole for the camera microphone added in OpenSCAD.

Now includes cutout for USB charge cable.

Print Settings

Printer:

Reach 3D

                                            <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>Yes</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.2</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>0%</p></div></p>                                                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>Print the file <code>oneplusone-nologo-hole.stl</code>. The other STL file is freewilly's original that lacks a microphone hole.</p><p>Print vertically on a raft. Use 0.8 mm shells and no infill — any infill may make the surface rough.</p><p>Total printed size: 88 x 21 x 158 mm</p></div>

Post-Printing

Clean up camera and mic holes with a sharp knife. Make sure that the sides of the print are free from lumps inside, as the phone won't fit the case well if there's anything in the way.

You will need to flex the case slightly to get the phone inside. Some PLA filaments are very brittle and may not work. I used PLA+ which is very slightly flexible.

For a smoother and slightly more durable finish, paint the outside back and sides with a couple of coats of acrylic medium. Don't use any on the inside as it will interfere with the phone fit.

Protective Cover Case for Oneplus One - with mic hole