Summary

New version - Handle_4 - with improved locking system using single M4x20mm screw.

A nice chunky grip to hold onto this very chunky camera!

Print in PETG or PLA and use the sliding insert to lock in place. I also printed in wood filled PLA, which can be sanded to a nice finish, but the resolution of the internal detail wasn't very good, so I used the two M3 sized holes at the side with pointed grub screws to attach it.

Print Settings

Printer Brand:

Prusa

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>i3 MK2S</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>Doesn't Matter</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.2mm or less</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>Any</p></div></p>                                                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>I find printing vertically with the top facing the print bed works best. Use a brim if the adhesion isn't enough, I didn't need it with PETG.</p><p>Wood filled PLA (eg Formfutura easywood) can be sanded to give a nice organic feeling finish.</p></div>

Pentax 6x7 right hand grip