Headphone Desk Hook for IKEA MICKE Desk

Designed to fit an IKEA Micke drawer, which is about 5.5mm thick and 60mm deep with 5mm of clearance between the drawer and the desk surface. There's a beak pointed inside the drawer so that when the drawer is in a closed position, the weight of the headphones will disburse into the desk surface (it will naturally want to pivot). I can probably get away with removing the beak from the design as it does catch the surface of the desk from time to time.

The headphones I use are the Corsair VOID RGB headphones, but the hook is wide enough (35mm) to accommodate the vast majority of headphone bands and it also works great for holding my Oculus Rift HMD.

(Update 12/10/2020)
This was one of my first original designs and I think it's a bit over-engineered. I simply removed the "tang" that extruded into the drawer. The purpose of the tang was to absorb some of the load when the hook tries to pivot/roll when under load, but headphones shouldn't be that heavy anyway and it seems to get in the way for a lot of people printing this. So I've uploaded a new STL with a "no tang" variant.

(Update 1/14/2021)
Added a Double Hook "no tang" revision. I use this for things like my Oculus Quest for the upper hook, and hang the controllers on the bottom hook.