Summary

Stem Fair
Print Settings

Printer:
Maker Select Mini
                                            <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>PLA:<br>Layer Height: .26<br>Wall Thickness: .8mm<br>Top/Bottom Thickness: .8mm<br>Infill density: 20%<br>Printing temperature: 200°C<br>Build Plate Temperature: 50°C<br>Diameter: 1.75mm<br>Flow: 100%<br>Enable retraction: yes<br>Print Speed: 60mm/s<br>Travel Speed: 80mm/s<br>Initial First layer speed: 40mm/s<br>Enable Print Cooling: yes<br>Build Plate Adhesion type: Skirt</p><p>ABS:<br>Layer Height: .26<br>Wall Thickness: .8mm<br>Top/Bottom Thickness: .8mm<br>Infill density: 20%<br>Printing temperature: 230°C<br>Build Plate Temperature: 60°C<br>Diameter: 1.75mm<br>Flow: 100%<br>Enable retraction: yes<br>Print Speed: 60mm/s<br>Travel Speed: 80mm/s<br>Initial First layer speed: 40mm/s<br>Enable Print Cooling: yes<br>Build Plate Adhesion type: Brim</p><p>TPU:<br>Layer Height: .26<br>Wall Thickness: .8mm<br>Top/Bottom Thickness: .8mm<br>Infill density: 20%<br>Printing temperature: 225°C<br>Build Plate Temperature: 60°C<br>Diameter: 1.75mm<br>Flow: 100%<br>Enable retraction: no<br>Print Speed: 60mm/s<br>Travel Speed: 80mm/s<br>Initial First layer speed: 40mm/s<br>Enable Print Cooling: yes<br>Build Plate Adhesion type: Brim</p><p>Make Two Big wheels of each type and one small wheel (<a rel="nofollow" href="/thing:2806585">https://www.thingiverse.com/thing:2806585</a>) of each type</p></div>
STEM Fair Big Wheel
