Summary

A quick release mount for cilindrical (1cm diam.) items. I used it to clamp my multi-tool/Dremel extension to a mini saw table.

Additional materials needed:
10x M3 nut
4x M3x20
6x M3x10
3x 4mm diam screw (for mounting the socket and hook)

Prints needed:
1x Bed
2x Clamp
1x Socket
1x Hook

Print Settings

Printer:

Anycubic Kossel Linear

                                            <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>Yes</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.15mm</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>10%</p></div></p>                                                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>Only the clamp file needs a support touching buildplate because of the arc shape.</p></div>

Post-Printing

Installation

            <div><p>Clear all the holes of printing errors and make sure that your bolts fit through by pre-fitting them and turning them until they do not grip into the plastic anymore. </p><p>For mounting the socket and the hook, perform a dry-fit in the final "fixed" position to determine where the screws should be at, since the hole in the hook is excentric.</p></div>

Quick Release Cilinder Mount