SDX's Double CR-10 Stock Fan

BETA-Version!
You may try it... but if it doesn't work like you want to, DO NOT BLAME ME! ;-P

This is my first version of this double fan duct. You'll need two of the stock blower fans. and you'll need super glue.

Do not unmount the Hotend!

1. First screw the base plate to the carriage.
2. Glue on the middle part. On the right is some space to place the cables.
3. Glue on the fan holder/ducts. try to keep a little distance to the middle part.
4. Click in the blower fans... if well printed, they should fit tight.
5. Screw on the 40mm fan and (optional) the front plate (the bottom holes are not optimal placed... I used cable straps)