Oculus Gun Stock Quick Change, But Better

I made this based off of Swift_McFly's 'OCULUS TOUCH GUN STOCK LEFT HAND QUICK CHANGE' (https://www.thingiverse.com/thing:2314106)
Several changes have been made to suit my needs.

This was designed for use with these magnets:
https://www.amazon.com/gp/product/B06XCCG2S9/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

Quantities:
1 x Oculus-left-fixed.stl
1 x Oculus-right-fixed.stl
2 x Oculus-mount-fixed.stl
(See the Print Settings section if the model shows up too large in your slicer)

Wall of Text summarizing my changes:
I shrunk the bases a lot, which sped up printing and reduced the amount of plastic used
I shrunk the holes to fit the dimensions of my magnets
I made the triangles that hold the touch controller mounts in place curved in order to make quick insertion easier
I also made it so that the triangle for the right controller is backwards. This should help you keep the gun stock steady by using your right hand to pull the stock closer to you, as where before this would just cause the controller to slip away from the rail mounts. I kept the left controllers triangle facing forwards, that way if you remove the right controller from the stock, the triangle on the left controller will act sort of like a hook which will hold up the gun stock. The right controller is capable of supporting the gun stock without the left controller using the pull of the magnets alone.