Pollux v2 Hexacopter with 10° forward angled Motors

The Plates are Carbon Fiber and the Motor Mount is a 3d Print Part

Motor Mount for a Hex with forward facing Motors.

• Forward Angle 10°
• Designed for T-Motor MN1806 2300KV

Frame Parts:
18x M4x10 Screw
18x M4 Locknut (DIN985)
10x M3x40 PCB Spacer Female/Female
20x M3x10 Nylon 6/6 Screw
4x 3mm washer 3mm height (i used M5 Nylon nut)

Motor Mount Parts:
24x M2x8 Screw
24x M2 Locknut (DIN985)
If you have trouble screw and unscrew the locknut in order too loosen up the fit.

Flight Controller Parts:
4x M3x10 PCB Spacer Female/Male
4x 3mm washer 3mm height (i used M5 Nylon nut)

Change log :
V0.2 Fixed LiveCamMount fitting with frame. Reduced maximum camera screw spacing to 34mm.
V2.0 Reduced Plate Sizes in order to improve climb rates.

FPV maiden video:
http://youtu.be/HVizB0mzKK8
V2: http://youtu.be/aQQPWVTU-34

Angled Mounts for other Multicopter
ZMR-250 10 Degree Tilted Motor Mounts http://www.thingiverse.com/thing:564897