Summary

ZOHD RC Airplane stock motor is 2006 size..
I wanted to use 2206 sized fpv drone Motor.
Print Settings

Printer:
A8
                                            <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>Doesn't Matter</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.1(PLA) or 0.2(PETG) over  </p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>100%</p></div></p>                                                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>My printer is A8<br>Slicing Program - CraftWare 1.16 beta</p><p>Edit. PLA  <br>Resolution<br>Extrusion Width-0.35 mm<br>Layer Height-0.1 mm  &lt;0.2mm&gt;<br>Draw Speed-40mm/s  &lt;10mm/s&gt;</p><p>Extruder Flow Adjust-103% &lt;105%&gt;</p><p>Vertical Shell<br>Loop Count-3 loops (1.05mm)<br>Perimeter Width 100%<br>Perimeter Speed 25%   &lt;80%&gt;</p><p>Top/Bottom Shell<br>Type-Concentric<br>Layer Count 10 (1mm)</p><p>Drawing Order<br>[perims-&gt;loops] -&gt; [fills]</p><p>Far Travel<br>Min.Distance 10mm<br>Elevation 2mm<br>Retract Length 2.1mm<br>Prime Length 2.3mm<br>Retract/Prime Speed 100mm/s<br>Travel Speed 250mm/s<br>Vertical Speed 50mm/s</p><p>Foundation<br>Skirt<br>Offset 5mm<br>Min.Length 400mm<br>Min.Count 1 loops<br>First layer<br>Height 0.21mm  &lt;0.2~0.3mm)<br>Extr.Adj. 100%<br>Draw Speed 10mm/s  &lt;5~10mm/s&gt;<br>Travel Speed 75%<br>Temp 100%<br>Z Adj. -0.01   &lt;-0.01&gt;</p><p>Temperature<br>(Using Polycabonate DIY Chamber)<br>Fan Speed 91%<br>Disable Fan on First 2 Layer<br>Bad Temp 55 Degree (Fist 2 Layer 65 Degree. Gcode Modified)</p><p>Extras Startup Extrude 30mm</p></div>
ZOHD Dart 2206 Brushless Motor Mount
