Summary

This is a PVC pipe holder for a DIY CNC machine prototype I'm working on.

The screw holes are Ø 4 mm, so they are meant for M4 screws and nuts albeit might be a tad tight due to the shrinkage that occurs when the print cools down (or my printer just needs calibration)

For 4 pcs:

Print time: 1 hours 58 minutes
Filament used: 13.13 meters of PLA

Estimated material cost (PLA): ~1,18 €
(Calculated from 200 m spool with a price of 17,99 € ≈ 0.08995 / m)

Print Settings

Printer Brand:

FlashForge

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>Finder</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>Yes</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>Standard</p></div></p>                                                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>Printing glue stick was used to ensure that the model doesn't lift from the platform, since some portions of the design are relatively thin, and might cause them to lift up during the first few layers.rnrnSupports used for the holes. Not a requirement, is your printer can handle it.</p></div>

PVC Pipe holder Ø 20 mm