Summary

I've tried for a while to hang small organizer baskets from the insides of cabinet doors for organization. While I've had some success with small command hooks, they've never hung quite properly because of the basket's sloped sides. So, I decided to make a bracket to hang them totally level! With two of these and a couple small Command Adhesive strips, you too can securely mount small baskets to your walls and doors!

Print Settings

Printer:

Monoprice Maker Select v1.3

                                            <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>I printed mine upright so I don't need support for the small retaining clip. This does, however, create a weak point where the clip can break off right where it meets the main body. To counter this, I've made the clip rather thick (3mm) and set the infill to 99% throughout the clip. You can see in my Cura screenshot how I've modified my infill settings to use high infill where the clip joins the body, and less infill in the lower portion of the body where extra strength isn't needed. </p><p>If you have a high stress application, you might need to print the bracket flat on it's back and add supports, but for me printing vertically looks better and has plenty of strength.</p></div>

How I Designed This

                <div><p>The model was designed in Autodesk Fusion 360. (File attached) I took measurements of the basket using a ruler, calipers, and a depth gauge. I'm rather new to modelling, so the measurements aren't perfect, but after several revisions I'm satisfied with the fit.</p></div>                <p class="detail-image"><img src="https://cdn.thingiverse.com/assets/81/f0/57/8b/29/IMG_20180506_144600783_LL.jpg"></p>            <p class="detail-caption"><strong>Final product (left) has a lower draft angle and different print orientation compared to my first prototype (right.)</strong></p>                <p class="detail-image"><img src="https://cdn.thingiverse.com/assets/55/37/0e/e9/0e/IMG_20180506_144404235_BURST000_COVER_TOP.jpg"></p>            <p class="detail-caption"><strong>This attempt didn't have enough clearance between the clip and the body, causing the clip to break off, highlighting this design's weak point</strong></p>

Basket Bracket