Pliers_Holder

This Item was printed in:REAL-Filament's Black PLA ø1.75.

Slicer: Slic3r Prusa Edition.

you'll need a ø8mm rod, the length of the rod is up to you, of course depending on how many pliers you have :)

This is designed to be mounted on a wall with a wood screw.

Quality
Layer height: 0.20mm

Shell
Wall Thickness: 3mm
Top Thickness: 5mm
Bottom Thickness: 4mm

Infill
Infill Density: 15%
Infill Pattern: Honeycomb.
Top/bottom fill pattern: Rectilinear

Speed
Print Speed: 60 mm/s.
Travel Speed: 120 mm/s.

Support
Enable Support: No.

Build plate Adhesion
Build plate adhesion type: skirt.