WRA Spec Wing Fins - Reduces Waggle

I made these up to use on my WRA Spec wing. These are probably not "officially allowed".

However! I've designed these to make a more enjoyable FPV flying wing that has less waggle and to help hold its attitude in the sky.

There are several sizes, use the thinnest possible if you can as that will reduce weight. Put on the top AND the bottom of your wings, evenly spaced for maximum effect.

If you fly & land on really rough ground, go for the thicker version on the bottom fins so they last longer.

IMPORTANT
Print using 100% infill and leave to cool before removing from the printer bed. If you have to pull them off early, then place on a cool FLAT surface, with a light weight on them so that the fins do not warp.

Notes:

1. You can try putting toe-in on the fins for extra stickiness in the corners

2. These were definitely inspired by the RiteWingRC models, you can see them here http://ritewingrc.com/

3. Any questions? See the FaceBook group here https://www.facebook.com/groups/ragthenutsoff/

4. Yes they're probably not allowed in the WRA specs, but I hate waggle in wings and these will help sort that out without going overboard with extra nose weight.