Plague Doctor Syringe

What to print:

You need the "Ring" three times. Every other part is only needed once.

How to assemble:

1. Glue 2 of the 3 body-rings onto the "handle-holder" part.
   The remaining ring is glued onto the "plunger-cap"

2. Screw the handle-holder and the fluid onto the body. Both go in thread first.

3. Put the Body-Ring onto the fluid.

4. Screw the needleside-cap and the needle onto the fluid.

5. Pull the plungerside-cap over the plunger, thread first.

6. Screw the plunger into the plunger-cap

7. Push the plunger-assembly into the syringe and screw it onto the handle-holder.

Et voilà

You could print the Body and Body-Ring as one object, if you used support material.