Summary

I wanted to mount my Pi Camera to one of the Lack legs, but I didn't want to remake one of the spacers. I decided to fix the camera to the inside corner.

The ball-joint is 12.5mm in diameter, so it works great with a camera housing like the one in hackoholic's camera mount. It can be found here.

Print Settings

Printer Brand:

Prusa

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>i3 MK3</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>Doesn't Matter</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>.2mm</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>20%</p></div></p>                                                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>I printed in PLA with no brim or supports.</p></div>

Post-Printing

Mounting

            <div><p>The screw holes are sized for M4 fasteners, but you could always use small woodscrews as well. The Lack legs are basically cardboard at that location, so be cautious about putting too much torque on the fastener. You can always use an anchor or wood glue as well, but the part only has to bear the weight of the camera. Which is almost nothing. So it should be fine.</p></div>

Lack Pi Camera Arm (Corner Mount)