80mm Desk Fan
This great looking desk fan works fantastically and is sure to cool you down at your desk either at home or in your office. It can be used with a power bank or standard USB port and with the 5 volt to 12 volt inline converter you will get full power from your fan.
It tilts forward and back and folds flat for transporting it around too.
First I need to say this isn't just my thing. I have used a few things available on this sight (which I have provided the links to) to make this and added my own file which ties them all together for this project.
So first thanks to the following makers is in order:
mightynozzle for his fan grill.
Fan Grill: https://www.thingiverse.com/thing:2802474
Download: https://www.thingiverse.com/download:4769825
FlyingMashedPotatoes for his tripod.
Tripod: https://www.thingiverse.com/thing:604425
and tmorris9 for his long knob
GoPro Knob: https://www.thingiverse.com/thing:163883
Parts list:
2 pin 80mm x 80mm x 15mm Computer PC Brushless Cooling Temperature Fan Case 12V (with metal grill if you can).
USB Port 12V Car Cigarette Lighter Socket Male to Female Converter Adapter Cable
4 of M4x25 Screw and Nut.
Print the parts in the links following the instructions given by their creators.
The screw for the Gopro Knob was taken from a knob I already have (but I wanted white colour to match) so if you don't have one then search for GoPro knobs on here that may offer other solutions.
The USB to 12v cig adaptor will need the cig lighter socket cutting off. How you join the wires is up to you. (personally I don't want to solder them as I might use the adaptor in another project).
To print the fan case I used an Infill of 80, 0.80 walls and 0.80 top and bottom. 0.2 res.
No Supports needed.
Enjoy!!
This is my first Thing added here so be gentle.