Summary

See under gif
Custom Section

Custom Section

Summary 2
            <div><p>DONT USE THIS VERSION - Version 2 is much better, I will delete this version soon.</p><p>Version 2 is easier to print without damage on support separation,  it uses less resin, it's easier to paint, and easier to assemble, and stronger and more resilient once assembled.</p><p>The individual STL files are 3 highlights from the 76 models that make up the 4-Mation 3D Zoetrope "Fish eating Fish". </p><p><strong><em> STL Files updated 15th July 2019! please make sure you have latest version! </em></strong></p><p>The second picture show representative print orientations and supports (it's from the V2 set, but the orientation is the same) for those of you not using Formlabs printers.</p><p>All the STL files for the 76 models in the 20 frame loop are in the two ZIP files, and the print-ready Form files to print the animation on a Formlabs Form2 are in the fish_form_files 7z archive.</p><p>To make this 3D  Zoetrope I suggest printing it in clear resin, so that the fish support struts (or stalks) are clear, then tape over the stalks, and spray with a white plastic primer, then paint the fish in colour.</p><p>All the parts except frame 1 are labelled with letters from B to T representing Frame indices 2 to 20 respectively.</p><p>Please note the 2D colour paper carousel cover sheet (also animated) - with precise placement markings showing where to glue each part is not included, you'll need to get that from </p><h3> <a rel="nofollow" href="https://4-Mation.co.uk">4-Mation.co.uk</a></h3><p>See the image below.</p></div>                <p class="detail-image"><img src="https://cdn.thingiverse.com/assets/c4/e1/30/c8/77/uber_diy.jpg"></p>
DEPRICATED - see V2 .... 4-Mation: Fish eating Fish (Version 1)
