Summary

This is a birthday gift for my girlfriend - personalized nightlight lamp. I made it in one day.
My main inspiration source was these beautiful lamps: http://www.hannahnunn.co.uk/products/table-lamps.html. But since I couldn't order them, I tried to create smth by myself.
Thanks to this pic http://www.123rf.com/photo_21258485_seamless-pattern-with-donuts-and-cookies.html for the donut pattern.

Instructions

Materials and Intruments:
1) Acrylic glass (I used green 4mm thick)
2) Thick art paper
3) Plywood (6mm thick)
4) Usual desktop lamp.
5) 8 small neodymium magnets
6) Double sided tape
7) Laser cutter
8) Hot glue
9) Grinder straight for acrylic glass

The assembling process is easy to see on photos, here is a short description:
1) I took apart the desktop lamp and used the metal from it's cap as a stand for bulb in my lamp;
2) I lasercutted the inside skeleton cap, stand from acrylic glass and vertical frame from plywood;
3) I lasercutted and assembled the back side with a small window with magnets, that will be used for easily changing the bulb and a small cutout for the wire.
4) I grinded the backside so it will perfectly fit and attached the it and the bulb with stand using double sided tape and hot glue;
5) I attached outside skeleton stand, using transparent double sided tape;
6) I engraved on the art paper the patterns and the text with congrats (Sides 1, 2, 3) and attached them to the vertical skeleton using double sided tape; One of the sides (with donuts) I attached so that the engraved part is inside the lamp, so you can see the picture only when you switch on the lamp;
7) I attached the outside skeleton using hot glue.

DIY Nightlight Lamp