Summary

Fuse mounting panel used to mount fuse holders.

Instructions

I did this to my machine after blowing my poly fuses using 24v.

Know your machine. Know your capability. Proceed at your own risk.

I removed the blown fuses from the RAMPS board and replaced them with a jumper (See Jumper pic). The fuses are wired in between the power supply and the RAMPS board. I put a 10A fuse in line with the 11A input to RAMPS. I put a 5A fuse in line with the 5A input to RAMPS. The printer powered right up and has been running happily for many prints.

After designing the panel to a close tolerance, I had to open the holes slightly after printing. I did have to print with support.

Fuse Panel for Mendelmax