Summary

Hello, this is one of my current project, i'm actually facing some probleme with my 3d printer so i didn't print all the pieces right now but when it's done i will post corrected files and some photo and video.
All the file now should print very good. without support

I post solidworks 2014 pieces

Instructions

For this pretty cool robot you need some time to print i think i can print all the pieces ihn something like 30hours.

You need: 4 6v dc motor 25mm with 75:1 or 34:1 reduction
(http://www.pololu.com/product/1575)

4x whell, i use this ( http://www.pololu.com/product/1558) with adaptator.

You will also need some shock absorber, i use 80mm shock absorber (something like this http://www.ebay.com/itm/RC4WD-Dual-Rate-Double-Spring-80mm-Aluminum-Scale-Shocks-Crawler-Scaler-Z-D0039-/281260664624)

And a good motor controller i used a saberthooth 2x12a with an rc system

In printed part you need
4 motor support
2 front
1 base center
2 piecearedecouper1
2 piecearedecouper2
2 spacer

For a good finish just bolt something like an aluminium plate on the spacer

all the thing are hold with m2.5 screw

Wild Rover <project>