2014 Printrbot Simple Maker Edition Induction Probe Mount

Update 5/7/14
Added the 18mm mount
New file: Stock_plate_probe_mount_18mm_RevA.STL

Update 5/4/14
I've changed the 12mm probe mount to lower it by 20mm. Offset distance remains the same. If anyone needs the 18mm probe version right the way please let me know. Otherwise I'll update that one when I get a chance.
New file: Stock_plate_probe_mount_12mm_RevA.STL

Update 5/3/14

I will have to modify these fittings to allow the probe to sit lower toward the bed. I did not realize that some of these probes do not have enough thread on them to be placed all the way down.

This is an add-on to your 2014 Printrbot Simple stock aluminum extruder plate to mount the induction probe sensor for auto bed leveling feature. I have included both the 12mm opening for the Printrbot probe as well as the 18mm opening for the aftermarket Amazon.com probe.

Update 4/26/2014
I've added 2 new integrated probe mounts. This gives a cleaner look plus you don't need to find 2 longer screws if you don't have them.
Stock_plate_integrated_probe_12mm.stl
Stock_plate_integrated_probe_18mm.stl

Update 4/26/2014 v.2
This is yet another variation to the extruder plate. This version moves the probe mount 30mm x 30mm away from the hotend while adding a fan mount to face the extruder setup. If your extruder motor is overheating and/or skipping during print, add the 40mm fan to keep it cool.

Stock_plate_integrated_extruder_fan_and_probe_12mm.stl
Stock_plate_integrated_extruder_fan_and_probe_18mm.stl