Summary

Had some washers and a 608 skate bearing and I thought I would do the only reasonable thing... make a fidget spinner!

Stop the print before it prints the top retainers, insert your washers, and then finish the print. They will be held in nicely FOREVER.

Washers I used are about 32 mm (1.25 in) diameter and about 1.5 mm (0.05 in) thick. Use two per slot for a total of 6Washers (the name.. get it?)

Print Settings

Printer Brand:

LulzBot

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>TAZ 5</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>Dunn mattah</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>Probly won't have any</p></div></p>                                                    <strong>Filament:</strong> ChromaStrand INOVA-2008                Match your eyes, fingernails, or your mismatched socks                    <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>I used a MOARstruder, which made the print insanely fast. You can use a tinystruder or a normalstruder... anystruder you want!</p></div>

Post-Printing

insert bearing

            <div><p>Use a press, or just press the bearing in with your fingers if it slides in nice. May be a loose fit, in which case, scale the whole things down a tad?</p></div>

Fidget Spinner - 6Washers