Summary

Customizable motor mount for a tricopter or similar things.

Motor and screw diameter are customizable.

Instructions

Parameter Descriptions:

/ [Global] /
screw_diameter_scale - Global scale for screw diameter.
tube_diameter_scale - Global scale for tube diameter.

/ [Motor] /
motor_angle - Rotate motor screw holes around center.
motor_diameter - Motor diameter
motor_screw_diameter - Diameter of motor screw holes.
motor_screwcap_diameter - Diameter of motor screw caps.
motor_shaft_diameter - Motor shaft diameter.
motor_hole_dist_1 - Distance of motor holes
motor_hole_dist_2 - Distance of motor holes

/ [Tube] /
tube_diameter - Tube diameter
tube_offset - Increases the distance of the motor hole from the motor.
tube_wall - Wall thickness around the tube hole.
tube_overlapping - Set the length of the tube hole.

/ [Servo] /
servo_diameter - Diameter of the hole to mount the servo arm.
servo_offset - Increases the distance of the hole to the motor.
servo_wall - Wall thickness around the hole.
servo_armlength - Servo arm length. This will change the width at the end where the servo mounting holes are.
servo_length - Length of the servo mounting hole.

Yaw Motor Mount