Summary

This is a simple sandwich-style case for Fabio Defabis' Z80-MBC2 computer from Hackaday. (Here: https://hackaday.io/project/159973-z80-mbc2-4ics-homemade-z80-computer) The mark-up is a bit rough, but it fits ok, and it provides easy access to all of the useful ports and controls while protecting the board itself. The case will print in two pieces and you should put them together with screws.

Print Settings

Printer Brand:

MakerBot

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>MakerBot Replicator (5th Generation)</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>Yes</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                    <strong>Filament:</strong> Does anyone care?  Why is this a required field? I used PLA.  Should probably work with anything.                Looks like some kind of grey to me.

Post-Printing

Because I suggest that you don't bother with supports, you may want to sand the recesses around the holes in the base of the case to remove the burrs that tend to show up there during the print. You may also want to turn the screws into the holes on both the top and bottom of the case and back them out once, just to make sure that the case will go together properly when you use both pieces.

How I Designed This

This is the product of taking a caliper to an assembled MBC2 and just sort of marking up something in OpenSCAD that would correctly cover it.

Z80-MBC2 case